415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
Threaded on one side and with a flange on the other side that makes a fixed fit for a 50mm fuel hose mounted with a hose clamp, this filler neck is intended to be used with the Nuke Performance Competition Fuel Cell (CFC) Unit. This setup is installed by being screwed down into the existing fill neck after the fill cap has been removed and is sealed with an ethanol proof Viton o-ring. It utilizes the existing rollover protection. For 50mm fuel hose. No fuel hose or hose clamp is included.
|Manufacturer Part #||150-05-202|
|Country of Manufacture||Sweden|
|Weight||0.44 lbs (0.2 kg)|
|Height||2" (5.1 cm)|
|Width||3" (7.6 cm)|
|Length||3" (7.6 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.