415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
Replacement Stainless Steel 10micron 200mm Fuel Filter insert for Nuke Performance AN-8 / AN-10 200mm Fuel Filters. This is a Nuke Performance unique product, we always recommend you to use original Nuke Performance spare parts and this is the only filter insert that can be mounted in our 200mm Performance Fuel Filter. Two pc O-ring is included with the filter insert, this is all you need to change the filter in our Fuel Filters. The internal spring is not needed to replace when changing filter inserts. We recommend that the filter insert is cleaned / replaced at least once per season to maintain maximum function. This is far more important when using alcoholic fuel such as ethanol and methanol.
|Manufacturer Part #||200-10-104|
|Country of Manufacture||Sweden|
|Weight||0.44 lbs (0.2 kg)|
|Height||1.6" (4 cm)|
|Width||1.6" (4 cm)|
|Length||78.7" (200 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California will require and affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.