Nuke Performance Vacuum Station Slim 3 Outputs
Nuke Performance Vacuum Station Slim 3 Outputs
$60.90
- Aluminum extrusion from 6082-T6
- End thread 1/4 G
- 3x outlet thread 1/8 G
- Comes with 1x 1/4 Pneufit quick connect fitting and 1x 1/4 Plug
Description
The Nuke Performance vacuum manifold is the easiest way to get rid of too many vacuum hoses in the engine bay. Combine all the engine parts which need vacuum into one connection to the manifold, such as fuel pressure regulator, blow off valve, fuel pressure gauge, fuel pulse dampers etc. Usable in turbo and supercharged engine applications. Delivered with 1x 1/4 G Pneufit quick connect fitting and 1x 1/4 G Plug. Thread size for the output ports are 1/8G and are sold separately due to the wide variety of different needs. We recommend the Nuke Performance 1/8 G Pneufit quick connect fittings to be used with this Vacuum Station.
Specifications
| Outputs | 3 | See more like this |
|---|---|---|
| End thread | 1/4 G | See more like this |
| Outlet thread | 1/8 G | See more like this |
Details
| Manufacturer Part # | 600-01-202 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.31 lbs (0.1 kg) |
| Height | 1.1" (2.9 cm) |
| Width | 1.1" (2.9 cm) |
| Length | 3.7" (9.5 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.
