415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
See photo for slight surface scrape on one of the pads. All other pads are in normal condition. These are 100% usable and have no reduction in stopping force or otherwise. These were improperly packed and got this slight damage in shipping. Never used. One time special with 30% off. This is a non-returnable item. Pair of front brake pads for BMW M3. Can fit multiple other BMW models. Racing oriented and built to withstand high temperatures. See full fitment list below.
The Pagid RST compounds are designed to comply with the latest requirements of rally, spring and stock car racing. The RST1 compound is an aggressive compound targeted at Rally and NASCAR applications and in most cases should be run with slicks. If run with DOT tires, the stopping power could cause brakes to lock, which would result in flat-spotting tires. For an E90 BMW M3, many have had success in using the RST1 compound for short races, balanced out with the RST4 in the rear.
|Manufacturer Part #
|3.00 lbs (1.4 kg)
|5.5" (14.0 cm)
|4" (10.2 cm)
|8" (20.3 cm)
|Yes (see note below)
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.