415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
SKU #: RAT-RT4100
Announcing the all new Racetech 4100 Series! The RT4100 is a standard-sized fiberglass race seat. We have focused on achieving a lightweight seat shell with optimized geometry, straddling that line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. Our patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the rollcage at shoulder level. Large harness guides and a removable molded base cushion allow a range of drivers of varying heights to fit. Breathable Spacer fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. For the larger driver, the RT4100WT is 60mm taller and 40mm wider and for those wanting a seat with head restraints, our RT4100HR and RT4100WTHR complete the 4100 Series. The 4100 Series seats use Racetech RTB1009M alloy side mounting brackets.
|Weight||13.22 lbs (6.0 kg)|
|Height||87" (221.0 cm)|
|Width||50" (127.0 cm)|
|Length||60" (152.4 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.