415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,149.00
SKU #: SLR-E3X
Intended for 1982 to 1998 BMW 3 Series E30, E36 and Z3
Lightweight tubular high strength control arm set, including matched Billet 7075-T6 Aluminum roll-center, bump-steer and quick steering geometry plates. Each control arm is 100% TIG welded in house at SLR by a master of the craft. Built to OEM control arm length by default. These are some of the lightest and strongest front control arms available on the market. If you have a little extra room under the fenders, instead of adding spacers or low offset wheels we can build the arms to suit +54mm or +108mm track width in order to increase your track while maintaining your scrub radius as close to stock as possible for better, more neutral steering feel and control.
Unlike our drift kits we do not build the race kit with maximum angle clearance in mind, this kit is built with the sole purpose of lowering your lap times. No sway bar provision by default as we recommend the M3 style strut sway link, but a control arm sway link provision can be added as an option if so desired.
The arms are affixed with custom designed and developed hardware proudly machined in the USA by SLR from forged 4140 billet steel.
This kit bundles four expensive upgrades for your car into one affordable package:
Country of Manufacture | United States |
---|---|
Weight | 8.81 lbs (4.0 kg) |
Height | 2" (5.1 cm) |
Width | 12" (30.5 cm) |
Length | 14" (35.6 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.