415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,834.02
SKU #: TIL-B10-XL-C
Manufacturer Part #: B10XL-48.5C/GRP
SHIPPING WEEK OF 4/29
The B10 seat is stylish, lightweight, rigid and compact. It is based on our popular B6 race shape but modified to be more convenient as a daily driver. The B6 has always been a great seat for those that liked a low head position with an enveloping and ultra supportive shape, but often the race type belt holes were awkward when trying to feed a factory three point seat belt through. The B10’s cut away sides allow convenient use of the stock belts with the added benefit that getting in and out of the seat is also easier. However, we have been careful to make sure that the support of the driver is not compromised. The front of the seat kicks up a little more than the B6, which not only aids drivers with longer legs but also helps if the seat were to be angled to a more upright position. A more upright seat allows a comfortable arm length in saloon cars, where the steering column cannot be extended, or lengthened towards the driver. The headrest height has been raised over the B6 seat so that a driver with a long torso does not run out of headrest support.
The B10 has been given a modern fresh look and although its highly technical laminate is rigid and tough, it weighs only 4.5 kg / 9.7 lbs. The seat comes complete with a Dinamica® suede covered headrest pad. The optional suede covered cushion and back panels add 1 kg and are recommended when the car is intended for mainly road use.
The B10 can also use a full six point race harness and is Hans compatible for those with a serious track car. The seat uses our latest FIA seat fittings to make certain it is mounted securely and can use all of our 2° bracket range.
* Fits Elise/Exige cars manufactured post 2017 when the adjustment runners changed from 383 mm to 345 mm length.
Seat Belt Compatibility |
3-point 5/6-point |
See more like this See more like this |
---|---|---|
Core Material | Carbon/GRP | See more like this |
Side Head Bolsters | No | See more like this |
Homologation | None | See more like this |
Year | Make | Model | Trim | Notes |
---|
Made by | Tillett |
---|---|
Manufacturer Part # | B10XL-48.5C/GRP |
Country of Manufacture | United Kingdom |
Weight | 9.70 lbs (4.4 kg) |
Height | 41" (104.1 cm) |
Width | 18" (45.7 cm) |
Length | 19" (48.3 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.