There was an error
The error has been logged. Please contact us at email@example.com and we'd be happy to assist you further.
The Cartek Motorsport GT Battery Isolator is a very small and highly reliable alternative to the traditional mechanical master-switch. The unit has been designed to overcome all of the problems and restrictions associated with mechanical and electro/mechanical safety cut-outs. When fitted to a race car this solid state battery isolator simultaneously isolates the battery and kills the engine immediately when triggered in accordance with FIA safety regulations.
This system has been designed to simplify installation thereby saving time and reducing build costs.
|Size||L = 92mm, W = 50mm|
|Battery negative terminal||M8 stud.|
|Positive power terminals||M6 stud.|
|Operational Voltage||7v - 18v|
|Current consumption||50mA ON, 7mA OFF|
|Battery negative switching current||600A cranking, 2000A surge|
|Positive power switching current||40A.|
|Operating Temperature||-10 -+85 degrees C|
|Storage temperature||-40°C - +125°C|
|Manufacturer Part #||CT-BT-02|
|Country of Manufacture||United Kingdom|
|Weight||0.31 lbs (0.1 kg)|
|Height||0.8" (2 cm)|
|Width||2.0" (5 cm)|
|Length||3.6" (9.2 cm)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us at firstname.lastname@example.org.