3mm injection molded optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit, is compatible with tear-offs, used exclusively on the M.8 model and is available in a variety of colors. Hyper Insert is available to improve fog control (sold separately.)

Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system and the performance features of the HP7 to create the most advanced, lightweight SA rated helmet that can be used in North America’s most demanding forms of racing. Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, used with or without ear cups in an ultra-lightweight configuration, delivered race-ready under 2.75 pounds. Always up to the challenge, Bell delivered with the innovative RS7 Carbon.

This is the 61+ cm (7 5/8 plus) size version.

Features:

• Aerospace grade ultra-lightweight carbon shell
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Multi-purpose fit system that can be used with or without ear cups (ear cups included)
• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
• Interior ventilation channels enhanced to maximize airflow
• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
• Integrated channels in face piece offer multiple options to install drink tube and radio systems
• Available in two versions: standard RS7C LTWT and RS7SC LTWT (non-ventilated)
• Top spoiler, top and chin bar gurneys available separately
• Top air attachments available separately
• Factory installed Hans anchors as original equipment
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: SE07, SV(SE07)
• Homologation: Snell SA2020
• Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
• Color: Carbon

The new Intercooler Series provides you with a new generation cooling core at the best price-performance ratio. The new competition core convinces with accurate processing and best cooling result with extremely low counter pressure. While old Bar-and-Plate cores already have been replaced by Fin-and-Tube cores our new Competition cores replace the ordinary Fin-and-Tube. The very light cooling cores have inner turbulators for an optimal cooling effect as well as lamellar structure for perfect usage of the airflow. An excellent balance regarding cooling effect, weight, robustness and price. The casted Aluminium Tanks are made of 3mm thick Aluminium cast and can resist highest boost pressure. These Models have matte instead of polished housings. All Intercoolers are tested to withstand 5 Bar pressure.
* The Core size given in the name is a measurement for comparison to common Bar-and-Plate Intercoolers. The new Fin-and-Tube Cores have smaller cores due to their construction, which give an advantage regarding the weight and responding qualities (smaller volume). The Fin-and-Tube Cores are smaller in reality but their size is still comparable to Bar-and-Plate because the difference in volume is balanced due to the better cooling effect. You’ll receive with a 1:1 swap a better performance and response quality!

This BOOST Products Silicone end caps are reinforced with textile layers to be extreme pressure resistant and also to vacuum in your boost System. These caps are suitable for blanking of your intercooler or radioator pipes/tubes, intake systems, water lines or similar. Also ideal when an engine and/or auxillary parts have been removed and been standing for a long time, corrosion etc. is slowed down by closing open connections on the engine and parts. The silicone blanking caps can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used to get in contact with fuel or oil!
In contrast to other suppliers, the Boost Products silicone caps are reinforced thanks to multiple fabric inserts, so they can also be loaded with pressure (air/water).
After many tests we deliver best quality at the best price! The BOOST Products silicone Products have achieved and many times even exceeded the quality of silicone items compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone Products made by BOOST Products. Rely on our quality!
BOOST Products silicone blanking caps have until 38mm 3 layers of fabric and 4,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the inner diameter
– when choosing the clamp take the wall thickness x2 for the right size
– silicone Products are 1-3mm elastic
– if you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuum in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products. Rely on our quality!
BOOST Products silicone hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the inner diameter
– when choosing the clamp take the wall thickness x2 for the right size
– silicone hoses are 1-3mm elastic
– if you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuum in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products. Rely on our quality!
BOOST Products silicone hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the inner diameter
– when choosing the clamp take the wall thickness x2 for the right size
– silicone hoses are 1-3mm elastic
– if you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuum in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products. Rely on our quality!
BOOST Products silicone hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the inner diameter
– when choosing the clamp take the wall thickness x2 for the right size
– silicone hoses are 1-3mm elastic
– if you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuum in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
Silicone Connectors with Hump, also known as Hump Hoses, Bulge Hoses or similar. The ‘Hump” in the middle allows the Connector to bend or to stretch. This results in a bendable Flexibility. Recommended for Throttle Valves or Intercoolers connected to the vehicles body, and similar Connections. For connection Intercooler pipes and Lines. Also suitable for Water Lines.
Here with double Hump for even more Flexibility!
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products.
The hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the Inner diameter
– When choosing the clamp take the Wall Thickness x2 for the right Size
– Silicone Hoses are 1-3mm elastic
– If you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuums in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
Silicone Connectors with Hump, also known as Hump Hoses, Bulge Hoses or similar. The ‘Hump” in the middle allows the Connector to bend or to stretch. This results in a bendable Flexibility. Recommended for Throttle Valves or Intercoolers connected to the vehicles body, and similar Connections. For connection Intercooler pipes and Lines. Also suitable for Water Lines.
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products.
The hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the Inner diameter
– When choosing the clamp take the Wall Thickness x2 for the right Size
– Silicone Hoses are 1-3mm elastic
– If you can’t find the right size, choose the smaller one which is available

This BOOST Products Silicone Hose is reinforced with textile layers to be extreme pressure resistant and also to vacuum in your Air Charge System. These Hoses are suitable for your Intercooler system, Intake system, Water lines or similar. They can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used as Fuel or Oil line!
After many tests we deliver best quality at the best price! The BOOST Products silicone hoses have achieved and many times even exceeded the quality of silicone hoses compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company’s in the tuning and motorsport areas rely on silicone hoses made by BOOST Products.
The hoses have until 38mm 3 layers of fabric and 4,3mm wall thickness. From 41mm there are 4 layers and 5,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses’ quality.

What you should consider with Silicone

– The diameter refers to the Inner diameter
– When choosing the clamp take the Wall Thickness x2 for the right Size
– Silicone Hoses are 1-3mm elastic
– If you can’t find the right size, choose the smaller one which is available