DeatschWerks DW440 brushless in-tank electric fuel pumps have a total height of only 4 in., making them easy to retrofit into any OE pump module. Brushless technology reduces friction and heat, increases efficiency, vastly improves pump lifespan in ethanol and methanol fuels—and allows higher voltage inputs for increased flow! These pumps move 440 lph of fuel at 40 psi. Each fuel pump includes a controller, which accepts an 8-22 V DC input and creates a digital signal to allow precise speed and torque control. The controllers are available in three configurations: single speed, dual speed, and PWM-controlled. Controller are designed to be used with voltage boosters, and the pump kits also include bulkhead wiring.

Model Compatibility

• Subaru WRX 2008-2014
• Subaru STI 2008 +

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 90 degree AN-6 fitting can be used to connect to any PTFE (teflon) fuel hose to any AN-6 component. A ferrule is included to create a high pressure leak free seal.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 500 psi in stainless steel.

Part number 6-02-0812-20 is 20 ft of CPE hose, AN-6 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.
This 45 degree AN-8 fitting can be used to connect to any PTFE (teflon) fuel hose to any AN-8 component. A ferrule is included to create a high pressure leak free seal.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 500 psi in stainless steel.

Part number 6-02-0813-10 is 10 ft of CPE hose, AN-8 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi. The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard, these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

New o-rings and crush washers are recommended each time a fitting is reused. Sold in packs of 10. This is for 12AN fittings and couplers.