/div>
Category: Uncategorized
MOMO SAAB Hub Steering Wheel Hub
MOMO SAAB Hub Steering Wheel Hub
MOMO SAAB Hub Steering Wheel Hub
$95.00
Use with any 6 x 70mm bolt pattern wheel, for SAAB Hub
Description
Specifications
| Car Model | SAAB | See more like this |
|---|
Details
| Manufacturer Part # | 2304 |
|---|---|
| GTIN | 8024055003399 |
| Weight | 1.70 lbs (0.8 kg) |
| Height | 5.5″ (14.0 cm) |
| Width | 4.5″ (11.4 cm) |
| Length | 4.5″ (11.4 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
MOMO Trofeo Shift Knob
/
MOMO Trofeo Shift Knob
MOMO Trofeo Shift Knob
$189.95
- Knob Material: Mahogany and Beechwood
- Insert: Brown Leather
- Series: Heritage Shift Knobs
- Manual
- Fits any shifter handle up to 18 mm or 3/4 in.
Description
The Trofeo shift knob can be grasped in the palm of the hand but is equally adept for three-finger changes when the pace is reduced for a more scenic drive. Born through extensive prototyping to find the perfect ergonomics for the driving enthusiast in a manual car, the Trofeo exhibits exceptional craftsmanship. Featuring expertly combined mahogany and beech wood through the use of complex layering techniques and topped with a vintage cigar leather embossed with the classic MOMO Heritage logo.
Details
| Manufacturer Part # | TROMAG |
|---|---|
| Weight | 0.30 lbs (0.1 kg) |
| Height | 8.66″ (22.0 cm) |
| Width | 2.36″ (6.0 cm) |
| Length | 6.93″ (17.6 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
MSS BMW X5 X6 Fully Adjustable Suspension Kit
MSS BMW X5 X6 Fully Adjustable Suspension Kit
MSS BMW X5 X6 Fully Adjustable Suspension Kit
$1,358.41
$1,299.99
Fits F95 X5 and F96 X6 BMW non-M
Description
MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.
Superior Performance
Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.
Unparalleled Comfort
Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.
How it works
The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:
- BMW X5M & X5M Competition (F95) – MSS part # TBD
- BMW X6M & X6M Competition (F96) – MSS part # TBD
Specifications
| Application | BMW | See more like this |
|---|
Details
| Manufacturer Part # | 05aBMWX56SU |
|---|---|
| Country of Manufacture | United Kingdom |
| GTIN | 0764460043273 |
| Weight | 30.00 lbs (13.6 kg) |
| Height | 5″ (12.7 cm) |
| Width | 18″ (45.7 cm) |
| Length | 5″ (12.7 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Nuke Performance 1/4 Barb Fitting for 4mm Hose
Nuke Performance 1/4 Barb Fitting for 4mm Hose
Nuke Performance 1/4 Barb Fitting for 4mm Hose
$3.90
1/4 G Barb Fitting for 4 mm hose
Description
Whether for routing vacuum or fuel, Nuke Performance offers barb fittings in a variety of sizes and options. Ranging from 1/4 up to 7/8, these fittings can be installed in between lines or components where ever space is permitted, and can also be attached directly to most Nuke products, and certain engine blocks.
Spare 1/4 G Barb Fitting for 4 mm hose.
Quantity : 1pc
Specifications
| Side 1 Size | 1/4 G | See more like this |
|---|---|---|
| Side 2 Size | 4 mm hose | See more like this |
Details
| Manufacturer Part # | 300-10-113 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.02 lbs (0.0 kg) |
| Height | 1″ (2.5 cm) |
| Width | 1″ (2.5 cm) |
| Length | 2″ (5.1 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Nuke Performance 3/4 UNF Plug
Nuke Performance 3/4 UNF Plug
Nuke Performance 3/4 UNF Plug
$13.50
- Specifically made for Nuke Performance products
- 3/4 UNF male plug
Description
Designed specially for the Nuke Performance product range, these fittings are also universally compatible. Nuke Performance does recommend that you always use the fittings provided by Nuke Performance when changing size or function on all Nuke Performance products. This plug is specifically designed to withstand high power and excessive wear, in the right combination with the products they were intended for. This is a 3/4 UNF male plug.
Specifications
| Thread | 3/4 UNF | See more like this |
|---|
Details
| Manufacturer Part # | 700-01-104 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.20 lbs (0.1 kg) |
| Height | 1″ (2.5 cm) |
| Width | 2.5″ (6.4 cm) |
| Length | 3.5″ (8.9 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Nuke Performance Aluminum V-Band Clamp
Nuke Performance Aluminum V-Band Clamp
Nuke Performance Aluminum V-Band Clamp
$30.00
$27.00
Spare Nuke aluminum V-band clamp
Description
Spare Nuke aluminum V-band clamp. Compatible with Nuke products such as the 50mm blow-off valve.
Specifications
| Make | Universal | See more like this |
|---|
Details
| Manufacturer Part # | 910-02-101 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.44 lbs (0.2 kg) |
| Height | 2.8″ (7 cm) |
| Width | 3.1″ (8 cm) |
| Length | 0.8″ (2 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California will require and affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Nuke Performance Catch Can Petcock Drain Kit 1/4″
Nuke Performance Catch Can Petcock Drain Kit 1/4″
Nuke Performance Catch Can Petcock Drain Kit 1/4″
$32.00
Black push-in vacuum tubing, 8mm ID, 2m / 6ft length, black polyethylene, up to 10 bar / 150 psi
Description
Petcock Drain Kit with 1/4″ drainage port for use with Nuke Performance Competition Catch Can and Performance Catch Can. This kit includes everything you need for easy drainage of your catch can. The valve and hose are heat resistant and suitable for mounting in your engine bay. With the included 2 m / 6ft 8mm hose you can route the residual products to a location like the wheel well, below the engine or other location where it is easy to collect the residual products without having to disassemble the catch can from the vehicle. Comes with:
- Petcock Ball Valve with 1/4″ thread
- 2 m / 6 ft 8mm hose
- Heat-resistant valve
The Petcock Ball Valve mounts directly to the bottom of the Catch Can. Stable mounting that does not require any other brackets.
Details
| Manufacturer Part # | 265-10-101 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.44 lbs (0.2 kg) |
| Height | 1″ (2.5 cm) |
| Width | 8″ (20.3 cm) |
| Length | 10″ (25.4 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
relatedproducts
Nuke Performance O-Ring 8 x 3mm for Fitting Into Fuel Log
Nuke Performance O-Ring 8 x 3mm for Fitting Into Fuel Log
Nuke Performance O-Ring 8 x 3mm for Fitting Into Fuel Log
$1.30
O-ring 8 x 3mm for Fuel Log Fitting (in to fuel log)
Description
Spare O-ring 8*3mm for Fuel Log Fitting (in to fuel log) Quantity : 1pc
Details
| Manufacturer Part # | 700-10-102 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.02 lbs (0.0 kg) |
| Height | 0.5″ (1.3 cm) |
| Width | 2.5″ (6.4 cm) |
| Length | 3″ (7.6 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
obp Motorsport 13 lbs Chrome Radiator Pressure Cap
obp Motorsport 13 lbs Chrome Radiator Pressure Cap
obp Motorsport 13 lbs Chrome Radiator Pressure Cap
$15.99
13 lbs release pressure
Description
13 LBS Chrome Radiator Pressure Cap for obp Motorsport Header Tanks
Details
| Manufacturer Part # | OBPPC001 |
|---|---|
| Weight | 2.91 lbs (1.3 kg) |
| Height | 1.18″ (3.0 cm) |
| Width | 2.17″ (5.5 cm) |
| Length | 2.17″ (5.5 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].