Nuke Performance adjustable cam pulleys allow for fine tuning adjustment to cam timing to maximize performance. Adjustments can be made to tune an engine’s power band to an optimum RPM range for different applications. The pulley is CNC-machined from 6082 aluminum alloy and hard anodized for long life. Three M6 bolts are fastened with helicoil inserts for long durability. There are also hard washers included to make sure the pulley can do it’s job on the racetrack or in a drag race and you don’t lose your tune settings even under hard pressure. Tightening torque is 17 NM. For use on BMW M20 engine.

The Nuke Performance Fuel Rail for Nissan engines is thought to be the highest flow rate rail on the market. This version is compatible with Nissan 200 SR20DET Sunny GTI-R engines using OEM 14 mm injectors, designed to be used with the European head. The body and all components are CNC-machined from 6082 aluminum alloy. All the fittings has Viton O-rings for long lasting operation. The fuel rail has an anodized finish for long lasting function and a corrosion free appearance. Mounting brackets sold separately. If space is an issue we recommend you to use Nuke’s Banjo-type fitting, with oversized internal dimension for minimum cavitation.

Nuke Performance adjustable cam pulleys allow for fine tune adjustments to cam timing to maximize performance. Adjustments can be made to tune an engine’s power band to an optimum RPM range for different applications. The pulley is CNC-machined from 6082 aluminum alloy and hard anodized for long life. Three M6 bolts are fastened with helicoil inserts for long durability. There is also hard washers to make sure the pulley do its job on the racetrack or drag race and do not lose your tuned settings even under hard pressure. Tightening torque is 17 NM. For use on Volve 8v / 16v engines.

Universal 3-Spoke Corsica Series Racing Steering Wheel with Yellow Center Mark (OD/1956/N) by OMP®. Handgrip: oval, 30x28mm. Wheel Diameter: 13.78″ / 350mm. Grip Material: Leather. The Corsica steering wheel is a competition motorsport steering wheel designed for saloon racing or rally use. Dished steering wheel with 3 black anodized aluminum spokes. Supplied with horn button.

• This Steering Wheel is universal and requires OMP Wheel Mounting Hub for proper installation in your specific vehicle.

Universal OMP Velocita Suede sport/racing steering wheel. Outer handle is covered in a black Suede with an anodized aluminum center with 3 spokes. The side spokes sit lower, creating a slight arch over the center position and horn button. Each spoke is slightly contoured for comfort and control and on top of the wheel there is a yellow reference marker to quickly tell you when the steering wheel is in top-center position.

Pair of Front brake pads for Porsche 991 and 992. Can fit multiple other Porsche models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSC2 Compound Overview

The Pagid RSC brake pads line is for use with ceramic composite discs. The RSC2 compound is slightly more aggressive than the RSC1 compound, generally only for use in race and track day cars. It has particularly for the low thermal oxidation of the disc surface fibers. It is a low metallic resin bonded material containing steel and aramid fibers.

Running this pad is a great alternative for a ceramic to steel swap, since it allows the ceramic discs to incur only minimal wear. The pad material is known to be compatible with all known types of ceramics brake discs.

Model Compatibility

• Porsche 918 Spyder 2013 – 2015
• Porsche 991 GT3 [ceramic brakes] 2015 – 2018
• Porsche 991 GT3 RS [ceramic brakes] 2015 – 2018
• Porsche 991 R [ceramic brakes] 2016 +
• Porsche 991 Turbo [ceramic brakes] 2013 –
• Porsche 991 Turbo S [ceramic brakes] 2013 +
• Porsche 991.2 GT2 RS [ceramic brakes] 2018 +
• Porsche 991.2 GT3 [ceramic brakes] 2018 +
• Porsche 991.2 GT3 RS [ceramic brakes] 2018 +
• Porsche 992 3.0 Carrera 4S [ceramic brakes] 2018+
• Porsche 992 GT3 [ceramic brakes] 2020+
• Porsche 992 Turbo [iron brakes] 2020+
• Porsche Cayman GT4 [981] [ceramic brakes] 2016 +

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments