Improve lap times, increase car control, cut out the worry of many-years old factory parts breaking, and add a modern touch of flair to the cabin of your track car with these pedal boxes that mount directly right to the floor of the chassis with no cutting, welding or modification needed. Crafted from lightweight steel, OBP has designed a pedal box that mounts to anywhere in the car it is needed to be with little to no modification. This pedal box allows for the mounting of cylinders to remain inside the vehicle for easier maintenance, and to be able to better monitor your fluid levels. It also allows for a brake bias and adjuster to be installed in pair with the cylinders, so the operator can choose how much or how little pressure they would like towards the front or rear of the vehicle. The pedal boxes are designed to be mounted either at an angle on the firewall, on the floor. The master cylinders can be mounted facing away from the driver or toward them based on preference and model design choice. The pedals have a 4.9 – 5.45:1 ratio and the whole box weighs 4.6 lbs with bias bar, and NO master cylinders.

Universal 3-Spoke Corsica Series Racing Steering Wheel with Yellow Center Mark by OMP®. Handgrip: oval, 30x28mm. Wheel Diameter: 13.78″ / 350mm. Grip Material: Suede. The Corsica steering wheel is a competition motorsport steering wheel designed for saloon racing or rally use. Dished steering wheel with 3 black anodized aluminum spokes. Supplied with horn button.

Universal 3-Spoke WRC Series Black Suede Racing Steering Wheel with Yellow Center Mark (OD/1979/N) by OMP®. Handgrip: round, 30mm. Wheel Diameter: 13.78″ / 350mm. Grip Material: Suede. Mid-depth dished steering wheel with center mark, 3 uncovered anodized spokes. Complete with horn button.

• This Steering Wheel is universal and requires OMP Wheel Mounting Hub for proper installation in your specific vehicle.

Pair of Front brake pads for Porsche 991 and 992. Can fit multiple other Porsche models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSC1 Compound Overview

The Pagid RSC brake pads line is for use with ceramic composite discs. The RSC3 is the most aggressive ceramic disc brake compound Pagid makes and is intended for race applications.

Model Compatibility

• Porsche 918 Spyder 2013 – 2015
• Porsche 991 GT3 [ceramic brakes] 2015 – 2018
• Porsche 991 GT3 RS [ceramic brakes] 2015 – 2018
• Porsche 991 R [ceramic brakes] 2016 +
• Porsche 991 Turbo [ceramic brakes] 2013 –
• Porsche 991 Turbo S [ceramic brakes] 2013 +
• Porsche 991.2 GT2 RS [ceramic brakes] 2018 +
• Porsche 991.2 GT3 [ceramic brakes] 2018 +
• Porsche 991.2 GT3 RS [ceramic brakes] 2018 +
• Porsche 992 3.0 Carrera 4S [ceramic brakes] 2018+
• Porsche 992 GT3 [ceramic brakes] 2020+
• Porsche 992 Turbo [iron brakes] 2020+
• Porsche Cayman GT4 [981] [ceramic brakes] 2016 +

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

Racetech mill-finish 5mm (5083 grade) aluminum bracket for side-mounting seats. Five slots and five holes provide plenty of height and tilt adjustment.

Powder Coated in black

Sold as a pair.

Fits the following seat models:

• RT4009, RT4009W
• RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR
• RT9009, RT9009HR
• RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR
• RT9119HR, RT9119THR, RT9119WTHR
• RT4129HRW, RT4129WHR, RT4129WTHR
• RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHR

Hole spacing:

• Nom: 295mm
• Min: 290mm
• Max: 300mm

Racetech seats are made in New Zealand and have quickly become very popular in the US for their high quality construction and driver comfort. With an integral head restraint, the 4009HR series of seats is a “go-to” safety essential for many forms of rally and road racing. This range of seats is suitable for competition where 270 degrees of head support is required or for any series requiring an FIA 8855-1999 homologated seat. Common applications range from club level racing to national competition, showing that this is not only a versatile seat, but also a seat for serious racers.

The seats are all HANS compatible and intended for use with a 5/6-point belt. The shell finish is gloss black and the seat cover is made of stealth all-black fire-retardant fabric. This is the wider WHR version of the seat.

If you are drag racing, new rules may require the use of a back mount with any fiberglass composite seat. Please check with your governing body.