The M.8 Carbon is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 Carbon provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 Carbon is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance.

This is the helmet in size extra small.

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Ultralightweight Carbon Fiber Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes XXS (54-55) to 4XL (67-68) – Largest Size Range of Any Bell Model
• Available in White or Matte Black
• Snell SA2015 Homologation
• FIA8859-2015 Homologation

Size chart

BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products. Tested extensively under rigorous impact and flammability standards Available in colors Black, Red and Blue Formulated for maximum impact absorption using our superior technology Will not melt or drip in a fire and the padding is self-extinguishing Acrylic adhesive molded within padding for easy installation Easy to cut and shape for custom installation Features:

• 3/4″ thickness to fit 5/8″ – 7/8″ bar diameter
• Padding is 36″ in length

This is the Blue version.

CSF Intercoolers are made from military grade aluminum to surpass any other cooler on the market for quality and durability. Each cooler undergoes the most testing we’ve ever seen, with everything from burst pressure to wind tunnel testing, CSF demands the most out of their coolers to ensure they are the best performing and highest quality cooler you can buy. Each Intercooler is designed to have drop in fitment, and require no modifications for installation. CSF even ensures their packaging is the best. Each package is built to withstand a 10 foot drop to make sure that when you get your Intercooler, it’s flawless.

CSF Intercoolers Feature:

• Stepped core design for maximum surface area contact and internal intake air-flow volume.
• Largest “drop-in fit” intercooler available in the industry.
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization. Lab tested on CSF’s in-house wind tunnel.
• Rounded front face bar/plate design for optimized airflow through the core.
• “Drop-in fit” design for an easy & quick plug-and-play installation. Complete with OEM style “Quick-Connect” inlet/outlet connections.
• Fully reversible back to OEM spec with no modifications needed.
• ~40 *F drop in temperatures when compared to the OEM intercooler after multiple repeated runs.
• Power increase of 15-20 hp on stock cars, 25+ hp on modified vehicles.
• Lifetime warranty.

Vehicle Fitment :

• 2011-2019 BMW 328i, 335i (F30)
• 2011-2019 BMW 428i, 435i (F32)
• 2013+ BMW 2-Series N55 engine (F22)
• 2014+ BMW M2 & M235i (F87)

Lightweight (0.8KG lighter than stock) and extremely rigid high downforce Carbon Fibre (straight) rear wing designed by aerodynamics writer and designer Simon McBeath that fits the Lotus Exige S2 (04 – 06). Rear wing wing gives approximately 63% more down force than stock wing (493N of down force vs. 300N stock, 100mph at 12 deg AoA).

The rear wing kit is specially designed by Reverie to fit the Lotus Exige S2(04-06) providing increased downforce and performance.

Can be adjustably mounted for desired angle of attack. We also provide a fitting service, please contact us first for more information. Shipping available worldwide.

This listing is for the Plain finishing on the wing.

Please note the following disclaimer provided by Reverie and which applies to all Reverie products:

The MOMO MOD. 02 steering wheel is a traditional round design with a 350mm diameter and a unique 2-spoke design. A deep 87mm dish brings the wheel closer to the driver for easier steering input. A yellow centering stripe is also integrated into the design.

The wheel is available in black leather or suede finish and comes with a horn button. It is pre-drilled with the standard 6-bolt pattern.

The MOMO MOD 27 steering wheel is designed for confined sports car and racer cockpits. The anatomically-designed rim is covered with premium suede. A flat bottom gives the driver better leg clearance. The MOMO MOD 27 steering wheel has an anodized center with no drill holes. There is zero dish. This is the 270mm diameter version.

The MOMO MOD. 80 is a classic three-spoke racing steering wheel. The circular form and thumb/hand grips are what makes many racers feel that this is a natural fit to their car. Using the pre-drilled standard 6-bolt pattern makes for an easy install. This steering wheel is finished in suede and has a 350mm diameter with a 33mm dish. The leather and spokes are black. There is no center horn hole or horn button included.

We ship worldwide
MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• Audi A3 Sedan (8V 2012+) MSS part # 02aAUDA38VSN
• Audi A3 Sportback (8V 2012+) MSS part # 02aAUDA38VSB
• Audi A3 Cabriolet (8V 2012+) MSS part # 02aAUDA38VCB
• Audi S3 Sedan (8V 2012+) MSS part # 02aAUDS38VSN
• Audi S3 Sportback (8V 2012+) MSS part # 02aAUDS38VSB
• Audi S3 Cabriolet (8V 2012+) MSS part # 02aAUDS38VCB
• Audi RS3 Sedan (8V 2012+) MSS part # 02aAUDRS8VSN
• Audi RS3 Sportback (8V 2012+) MSS part # 02aAUDRS8VSB
• Audi RS3 Cabriolet (8V 2012+) MSS part # 02aAUDRS8VCB

The OBP E-Sports Pro-Race V2 Hydraulic Pedal System will take your sim racing experience to another level. Taking their knowledge and expertise of creating race winning real-world motorsport pedal boxes, OBP are now transferring this experience over to the world of sim racing with their E-Sports Pro-Race V2 hydraulic pedals.

Features:

• 10,000 Psi pressure sensor
• Aircraft grade T6061 aluminium pedals
• Mild steel cradle construction
• OBP motorsport alloy master cylinders
• Adjustable pedal ratios
• Ergonomic pedal pad adjustment for heel and toe
• Adjustable accelerator return
• All 3 pedals pivot on oil impregnated zero maintenance bearings
• USB adapter included

Constructed from aircraft grade T6061 aluminium pedals and mild steel cradle, these pedals offer adjustable pedal ratios, accelerator return and multiple pedal pad adjustments just like a real pedal box. Providing incredible feel and feedback for the driver, these pedals offer a braking sensation that is as close to real life as you can get. Available in a choice of colours, silver or black. The PC control board allows for high level resolution input featuring a 1000Hz response time which will eliminate any latency in pedal travel from the signal from the pedals to the computer. Kit contains: 1x OBP E-Sports Pro-Race V2 pedal assembly, 1x slave cylinder carrier and drip tray, 2x master cylinders, 2x slave cylinders, 4x high quality spring rubber, 1x st/st braided hose set, 1x pressure sensor and adaptor. A USB adapter to gaming system is included with the pedals.

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. This version fits the following cars:

• Porsche 991 Front including Turbo, GT3 & GT3 Cup
• Porsche 981 Boxster Front except Spyder
• Porsche 981 Cayman Front except GT4
• Porsche 718 Front