415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$35.27
FITTING TILLETT CAR SEAT BRACKETS
More details | Click to see if this fits my vehicleSKU #: TIL-TK8
Manufacturer Part #: TK8
The TK8 fitting kit consists of spacers and washers to move a bracket set away from the leg bulge on a Tillett seat.
Because Tillett seats are narrow the brackets sit partially under the legs, so as the seat is dropped on the available slots and holes the seat and bracket can come into contact and the brackets must be moved outwards.
This kit has two TW12 pegged spacers included. These have a slot support peg, which fills the slot above or below the one used by the bolt. This stops the bolt from moving within the slot and bursting through from one slot to the other in the event of an extreme impact.
The 4mm thick spacers are made from machined aluminium keeping the assembly solid and uncompressible whilst the 2 mm thick Nylon shims give a small adjustment possibility.
Works with Tillett brackets which are a minimum of 5 mm thick and with adjacent front slots 12 mm apart. TBFIAO2, TBFIAO8, PTBi, PTBO.
Made by | Tillett |
---|---|
Manufacturer Part # | TK8 |
Country of Manufacture | United Kingdom |
Weight | 0.50 lbs (0.2 kg) |
Height | 2" (5.1 cm) |
Width | 4" (10.2 cm) |
Length | 4" (10.2 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.