Spare Competition Catch Can 0.5/1.0 O-Ring bottom and top lid 76 x 2.5mm.

Quantity : 1pc

This is a 24 bolt fuel cell fill plate replacement that contains a built in Fuel Surge Tank for single or dual internal fuel pumps, such as DW300, DW400, Walbro GST450, Walbro GST 520 or any standard 39mm pump. It gives you a light weight and space efficient installation with minimum fuel piping and a easy-to-use setup. It really simplifies the setup and reduces the failure points in fuel system plumbing.

The Nuke Performance Competition Fuel Cell Unit (CFC) is a fill plate replacement for fuel cells from market leading manufactures including ATL, FuelSafe, Jaz, Harmon, Pyrotect and several others. It has a 6*10″ design with the standardized 24 bolt pattern to fit most manufacturers fuel cells. The minimum mounting depth of the fuel cell is 8.62″ (219mm).

The output of the two internal pumps is combined into one 7/8 AN-8 / AN-10 outlet with both fittings included. This allows the fuel tank to deliver steady fuel flow even for engines over 1400 HP. For the lift pump (pickup pump), the well known electrical connectors makes it possible to choose from almost any pump. The CFC’s surge tank has the well-known Nuke billet brackets and with this kit you get both the bracket for 39mm fuel pumps as well as the bigger one for Deatschwerks DW400 pumps.

Delivered with everything you need for a 1+1 or a 1+2 fuel pump installation and with both AN-8 and AN-10 fitting for the fuel line. It also comes with a AN-6 fitting with roll-over valve for ventilation. The fuel filler is integrated into the unit and comes with a billet aluminum cap. Alternatively, an adapter can be purchased to connect to fuel filler necks. Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol. Fuel pumps are not included.

This is an Open Box item. Everything is included but box has been opened.

This is a 24 bolt fuel cell fill plate replacement that contains a built in Fuel Surge Tank for single or dual internal fuel pumps, such as DW300, DW400, Walbro GST450, Walbro GST 520 or any standard 39mm pump. It gives you a light weight and space efficient installation with minimum fuel piping and a easy-to-use setup. It really simplifies the setup and reduces the failure points in fuel system plumbing.

The Nuke Performance Competition Fuel Cell Unit (CFC) is a fill plate replacement for fuel cells from market leading manufactures including ATL, FuelSafe, Jaz, Harmon, Pyrotect and several others. It has a 6*10″ design with the standardized 24 bolt pattern to fit most manufacturers fuel cells. The minimum mounting depth of the fuel cell is 8.62″ (219mm).

The output of the two internal pumps is combined into one 7/8 AN-8 / AN-10 outlet with both fittings included. This allows the fuel tank to deliver steady fuel flow even for engines over 1400 HP. For the lift pump (pickup pump), the well known electrical connectors makes it possible to choose from almost any pump. The CFC’s surge tank has the well-known Nuke billet brackets and with this kit you get both the bracket for 39mm fuel pumps as well as the bigger one for Deatschwerks DW400 pumps.

Delivered with everything you need for a 1+1 or a 1+2 fuel pump installation and with both AN-8 and AN-10 fitting for the fuel line. It also comes with a AN-6 fitting with roll-over valve for ventilation. The fuel filler is integrated into the unit and comes with a billet aluminum cap. Alternatively, an adapter can be purchased to connect to fuel filler necks. Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol. Fuel pumps are not included.

Pair of rear brake pads for Porsche 991 and 992. Can fit multiple other Porsche models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL29 compound, formerly known as Pagid RS29, is a long time favorite and reliable pad. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Combined with easy bedding-in behavior, this compound is very popular in club racing, for track days, GT cars, touring cars and prototype endurance racing. Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

Model Compatibility

• 2011 – 2015 Porsche 991 Carrera S / GTS
• 2015 + Porsche Boxster Spyder

Pair of rear brake pads for Porsche 997. Can fit multiple other Porsche models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL29 compound, formerly known as Pagid RS29, is a long time favorite and reliable pad. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Combined with easy bedding-in behavior, this compound is very popular in club racing, for track days, GT cars, touring cars and prototype endurance racing. Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

Model Compatibility

• 2008 – 2011 Porsche 997 3.6 C / C4
• 2005 – 2012 Porsche 997 all models with ceramic brakes
• 2006 – 2012 Porsche 997 Turbo
• 2007 – 2012 Porsche 997 GT2 / RS
• 2007 – 2011 Porsche GT3
• 2005 – 2012 Porsche GT3 CUP / Rally / RS

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments