The M.8 is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance.

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Lightweight Composite Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Snell SA2015 Homologation
• White color & size large version

Size chart

Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system and the performance features of the HP7 to create the most advanced, lightweight SA rated helmet that can be used in North America’s most demanding forms of racing. Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, used with or without ear cups in an ultra-lightweight configuration, delivered race-ready under 2.75 pounds. Always up to the challenge, Bell delivered with the innovative RS7 Carbon.

This is the 57- cm (7 1/8″ minus) size version.

Features:

• Aerospace grade ultra-lightweight carbon shell
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Multi-purpose fit system that can be used with or without ear cups (ear cups included)
• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
• Interior ventilation channels enhanced to maximize airflow
• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
• Integrated channels in face piece offer multiple options to install drink tube and radio systems
• Available in two versions: standard RS7C LTWT and RS7SC LTWT (non-ventilated)
• Top spoiler, top and chin bar gurneys available separately
• Top air attachments available separately
• Factory installed Hans anchors as original equipment
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: SE07, SV(SE07)
• Homologation: Snell SA2020
• Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
• Color: Carbon

The Sport is designed for entry level racers who demand value and quality at an affordable price. The Sport incorporates classic Bell design styling, standard size eye opening, comfortable interior fit and a lightweight composite shell. The all-purpose Sport offers closed face protection, a wide range of features, full ventilation and is a perfect choice for racers on a budget or enthusiasts just entering the sport.

Features

• All-Purpose Helmet with Classic Bell Styling
• Lightweight Composite Shell
• E-Max Multi-Density Energy Absorbing Liner
• Full Chin Bar, Forehead & Top Ventilation
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Comfortable Standard Interior Fit
• Positive Visor Seal Prevents Dust From Entering the Eyeport
• Standard Size Eyeport
• 281 3 mm SRV Shield (SRV-2 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Snell SA2015 Homologation
• White color & size large version

Size chart

This 11 piece auto trim removal tool kit is used to help remove and install, stereo systems, interior panels, exterior trims, upholstery panels, and more. This kit is ideal for helping with the installation of Course Motorsports DirectFit Phone Mounts. Made of impact resistant Nylon fiber which is much stronger than ABS plastic that breaks easily under pressure. Each tool is approximately 7 inches in length. Comes with thick sturdy pouch to store all of your tools after use.

Packaging Includes:

• 1x Storage Pouch
• 1x Wide-Type Remover
• 1x Pull-Type Remover
• 1x Angled Clip Panel Remover
• 1x Handy Remover
• 1x Narrow-type Remover
• 1x Upholstery Clip Remover
• 1x Fork Tip Flat Clip Panel Remover
• 1x Panel Remover
• 1x Blunt Tip Flat Clip Panel Remover
• 1x Sharp Tip Flat Clip Panel Remover
• 1x Clip Panel Remover

CSF Heat Exchangers are made from military grade aluminum to surpass any other cooler on the market for quality and durability. Each cooler undergoes the most testing we’ve ever seen, with everything from burst pressure to wind tunnel testing, CSF demands the most out of their coolers to ensure they are the best performing and highest quality cooler you can buy. Each exchanger is designed to have drop in fitment, and require no modifications for installation. CSF even ensures their packaging is the best. Each package is built to withstand a 10 foot drop to make sure that when you get your heat exchanger, it’s flawless.

CSF Heat Exchangers Feature:

• Stepped core design for maximum surface area contact and internal intake air-flow volume.
• Largest “drop-in fit” intercooler available in the industry.
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization. Lab tested on CSF’s in-house wind tunnel.
• Rounded front face bar/plate design for optimized airflow through the core.
• “Drop-in fit” design for an easy & quick plug-and-play installation. Complete with OEM style “Quick-Connect” inlet/outlet connections.
• Fully reversible back to OEM spec with no modifications needed.
• ~40 *F drop in temperatures when compared to the OEM intercooler after multiple repeated runs.
• Power increase of 15-20 hp on stock cars, 25+ hp on modified vehicles.
• Triple Pass Flow Design
• Lifetime warranty.

This listing is for the Black finish.

NEW V2 Model Available Now!

• Upgraded inlet/outlet design with new tapered entry and exit points from end tanks, resulting in optimized water flow and increased performance (matches OEM spec)*

• After extensive wind-tunnel, dynamometer (rolling-road test), and field testing, CSF engineers have improved the core spec from Version 1’s 68mm 2-row core with 8mm fin height to Version 2’s ultra-efficient 42mm 2-row core, with CSF’s B-tube technology and 6.5mm multi-louvered fin height*
• Increase of 15% more cooling tubes used in the core vs. V1 design for better surface area contact and heat dissipation

• Results in optimized airflow through the heat exchanger core and into other cooling system components for maximum performance of the entire cooling system (especially critical if installed in an X-Drive model with transmission oil cooler placed in front of heat exchanger)
• CSF V2 design: 2-row 42mm core vs. OEM design: 1-row 26mm core. ~62% increase in core fluid capacity

• Now includes hardware mounting kit* for applications that have a factory transmission oil cooler mounted in front of the heat exchanger (X-Drive models)
  (OEM #17118625431).

* World Exclusive

The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature.

In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability.

The DW400 has a 36mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-1006 install kit designed for:

• 04-11 Lotus Elise
• 05-10 Lotus Exige
• 00-05 Toyota Celica
• 03-04 Toyota Corolla
• 03-04 Toyota Matrix
• 00-05 Toyota MR2 Spyder

AEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances. The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation. The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale. Features:

• Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
• Designed for high output naturally aspirated and forced induction EFI vehicles
• In tank design
• Each pump is tested to flow 340 lph at 40 PSI
• Compact body (39mm diameter x 65mm length)
• Includes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended)

AEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g/26.1 oz. to only 595g/20.9oz. That’s almost 1/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.

Overview

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

View and log data from over 250 CAN devices!

The CD-7 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-7 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-7 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, please contact AEM for a full list of supported applications.

This listing is for the :

• PN 30-5702, CD-7G Carbon Non-Logging Display with Internal GPS

Features

• Full color 7” screen with 800×480 resolution
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• Layout files interchangeable with all versions of the CD-7
• Wiring interface/harness is identical to the CD-7
• Rugged, lightweight flow-molded carbon fiber composite enclosure
• Total display weight of 11.7 oz./331 grams
• IP66 water resistance allows for operation in boats and motorcycles without worry
• Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
• Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
• Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
• Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
• Available with or without 200Mb internal logging (up to 1,000Hz/channel)
• Available with or without on-board GPS receiver and antenna
• Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
• Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use included page layouts and input your channels and text, or create your own from scratch
• Free DashDesign Graphics Editor software
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Two programmable LEDs
• Odometer function
• Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
• ‘Headlight-in’ connection dims the dash and LEDs during night operation
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Convert CAN bus channel values to user-defined text in multiple languages

The AEM Water/Methanol Injection System Advantage

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.

AEM offers a few different water/methanol controller designs for gas vehicles:

• One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
• The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.
• The last is a Multi-Input controller and is dependent on an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.

Key Features :

• Multi-Input (0-5v/frequency) progressive controller design features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
• Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid.
• “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
• Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
• Precision-machined billet-aluminum injector with integral check valve
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
• 1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
• 20 feet of injection tubing included
• LED dash light for system status and low fluid warning

This is for the kit that comes with bare essentials, NO tank or fluid level sensor is included.
This kit can also be used on NA vehicles

Note from AEM : For optimum results, all Water/Methanol Injection Systems and gauges should be run with an AEM inline filter (AEM part # 30-3003)

A favorite for sedan and stock car racers, the GP-5W offers a wider eyeport and lightweight construction making for a durable and versatile helmet. Head and Neck Restraint devices with the standard 6mm helmet bolt can be easily added with the new M6 washer nut installed at the factory. The helmet is SA2020 certified. This is the white L version.

ScLc Construction It’s constructed of Arai’s exclusive, very-lightweight ScLc shell technology (Super Complex Laminate Construction), so it maintains a low overall weight to offset the added weight of the larger shield.

Shell Shape It has a smaller, more “natural” head shape, and a lower center of gravity to balance and stabilize the helmet so it feels even lighter, thereby helping to reduce fatigue.

Interior Fit The interior fit is typical Arai, benefitting from over 50 years of research and refinement, and resulting in a helmet that, as mentioned previously, more closely matches the shape of the human head. The first is snug, allowing for the smallest possible helmet to be worn while still being comfortable.

Wider Eyeport Larger 90mm eyeport, top to bottom, than comparable Arai models, provides a better vertical view desired by many sedan drivers. For drivers not needing a shield, a visor peak option is available.

Removable/Replaceable Cheekpads The cheekpads are removable and washable for easier cleaning. More importantly, they’re replaceable with optional sizes of varying thicknesses for a more custom, personalized fit.

VentilationThe upper ventilation system incorporates two large intake ducts and the same two exhaust vent ducts found on the GP-5(PED). This vent system allows for improved air flow even within the confines of a sedan or closed cockpit.

M6 Anchor Type Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

Size Guide

Size Guide