415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
The EBS bracket is designed to be used with the B6 Screamer or B7 seat for mounting in a Lotus Elise / Exige. These brackets are fixed mounted to the chassis in place of the original Lotus seat sliders for race and track applications and allow adjustment of angle, height and leg length in 5 mm increments by means of a U channel. They incorporate seat belt mounting points, can be installed on the passenger or driver side of LHD and RHD cars and fit the regular-width B6 Screamer (with and without edges), the edge-less B6 Screamer XL (TIL-B6S-XL-C-43 & TIL-B6S-XL-B-43) and B7 seats. The B6 Screamer XL with edges on (TIL-B6S-XL-C and TIL-B6S-XL-B) is too wide to be used with these brackets.
|Manufacturer Part #||EBS|
|Country of Manufacture||United Kingdom|
|Weight||4.85 lbs (2.2 kg)|
|Height||2" (5.1 cm)|
|Width||5" (12.7 cm)|
|Length||16" (40.6 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.