Motul
All products by Motul
Category: Uncategorized
Nitrous Express Jet Pack, Dual Stage Billet Crossbar, (50-300 & 100-500Hp)
Nitrous Express Jet Pack, Dual Stage Billet Crossbar, (50-300 & 100-500Hp)
Nitrous Express Jet Pack, Dual Stage Billet Crossbar, (50-300 & 100-500Hp)
$295.05
Jet Pack, Dual Stage Billet Crossbar, (50-300 & 100-500Hp)
Note: This item may take 1-2 extra days to ship
Description
NX Jets Are MANufactured On Cnc Equipment, ANd Are GuarANteed To Be Within .0005 Of Specified Jet Size. In Recent Testing, Using The Same Jet Size, NX Jets Out Flowed The Competition By 35%! That’S Right 35% More Flow Through The Same Orifice, How You Ask? The NX Jet Was Designed To Be More ThAN Just A Hole In A Piece Of Brass; Its Contoured Inlet ANd Multi-Stepped Outlet Allow Turbulence Free Flow With No Restrictions.
This product cannot be shipped to California.
Details
| Manufacturer Part # | 66042JP |
|---|---|
| GTIN | 653374012591 |
| Weight | 0.50 lbs (0.2 kg) |
| Height | 2.5″ (6.4 cm) |
| Width | 2.75″ (7.0 cm) |
| Length | 6.5″ (16.5 cm) |
| CARB compliant | No (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
Nuke Performance 2G Fuel Surge Tank 3.0 liter with Protec Cobra Brushless Fuel Pump
Nuke Performance 2G Fuel Surge Tank 3.0 liter with Protec Cobra Brushless Fuel Pump
Nuke Performance 2G Fuel Surge Tank 3.0 liter with Protec Cobra Brushless Fuel Pump
$2,155.00
- 2nd generation 3.0 liter Fuel Surge Tank from Nuke Performance, with a preassembled, brushless Protec Cobra fuel pump
- Next generation fuel setup in one lightweight and universal solution
Description
The newest updated version of the classic Nuke Performance fuel surge tanks series comes delivered with a preassembled brushless fuel pump from Protec Cobra-series. Top-notch engineering maximizes flow at minimal amperes.
Features:
- Twin-screw brushless fuel pump
- Higher pressure with fewer amps
- 100% Safe for all type of fuels, including ethanol
- Preassembled with Cobra fuel pump
- Lightweight aluminum billet fuel pump housing
- Delivered with external PWN controller
- For your every need, from 500 to 1200 horsepower
- 3.0-liter surge tank capacity
The Cobra brushless fuel pump has been engineered to provide precise fuel flow for the most demanding applications. It is suitable for use with ethanol, methanol, and petrol (gasoline).The Cobra pump is ableto deliver fuel at higher pressures while using fewer amps, all thanks to its brushless technology. The Cobra fuel pump is lighter than any comparable fuel pump and features a custom-built brushless motor with an ultra-efficient pump mechanism that provides unrivaled performance.
Included in package:
- 1 x 3.0-liter fuel surge tank
- 1 x 6 bolt pattern aluminum mounting bracket
- 1 x Protec Cobra brushless fuel pump of choice
- 1 x 65-micron pre fuel filter
- 1 x Deutsch connector, preassembled
- 1 x PWM controller with aluminum housing
* The Fuel Surge Tank is delivered preassembled, ready to use
Specifications
| Volume | 3 liters | See more like this |
|---|---|---|
| Ports | 4 | See more like this |
| Inlet Port Size | 3/4 UNF | See more like this |
| Outlet Port Size | 7/8 UNF | See more like this |
| Pump Location | Internal | See more like this |
Details
| Country of Manufacture | Sweden |
|---|---|
| Weight | 6.34 lbs (2.9 kg) |
| Height | 7.1″ (18.0 cm) |
| Width | 7.1″ (18.0 cm) |
| Length | 10.43″ (26.5 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
Nuke Performance 7/8 UNF – AN10 Fitting
Nuke Performance 7/8 UNF – AN10 Fitting
Nuke Performance 7/8 UNF – AN10 Fitting
$10.00
$9.00
- Specifically made for Nuke Performance products
- 7/8 UNF male to AN-10 male
Description
Designed specially for the Nuke Performance product range, these fittings are also universally compatible. Nuke Performance does recommend that you always use the fittings provided by Nuke Performance when changing size or function on all Nuke Performance products. This fitting is specifically designed to withstand high power and excessive wear, in the right combination with the products they were intended for. This is a 7/8 UNF male to AN-10 male fitting.
Specifications
| Type | Straight | See more like this |
|---|---|---|
| Thread side 1 | 7/8 UNF | See more like this |
| Gender side 1 | Male | See more like this |
| Thread side 2 | AN-10 | See more like this |
| Gender side 2 | Male | See more like this |
| Swivel | No | See more like this |
Details
| Manufacturer Part # | 700-01-112 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.20 lbs (0.1 kg) |
| Height | 1″ (2.5 cm) |
| Width | 2.5″ (6.4 cm) |
| Length | 3.5″ (8.9 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California will require and affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Nuke Performance Blue Setup Spring for 50mm Blow-Off Valve
Nuke Performance Blue Setup Spring for 50mm Blow-Off Valve
Nuke Performance Blue Setup Spring for 50mm Blow-Off Valve
$18.67
$16.80
Setup spring to use with Nuke blow-off valve. Blue spring rated at 0,35 – 0,50 bar / 5,07 – 7,25 psi.
More details
| Click to view other sizes and versions
| Click to see if this fits my vehicle
Description
This setup spring is used with the Nuke Performance 50mm blow-off valve to calibrate its setting to your needs. To get the effect you want from your new blow-off valve you will need to use the correct setup for your current engine specification. Engine vacuum should be measured at idle and with the engine up to operating temperature.
Nuke has three different springs to choose from, all designed for perfect fitment and performance in combination with our 50 mm blow-off valve. Check the chart below to get to know which spring setup you should go with.
Spring rates:
- Black spring: 0,50 – 0,75 bar / 7,25 – 10,9 psi
- Blue spring: 0,35 – 0,50 bar / 5,07 – 7,25 psi
- White spring: 0,00 – 0,35 bar / 0,00 – 5,07 psi
This is the blue spring.
Details
| Manufacturer Part # | 900-01-103 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 0.44 lbs (0.2 kg) |
| Height | 1.8″ (4.5 cm) |
| Width | 1.8″ (4.5 cm) |
| Length | 3.5″ (9 cm) |
| CARB compliant | No (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California will require and affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Nuke Performance Competition Fuel Cell Unit – OPEN BOX
/
Nuke Performance Competition Fuel Cell Unit – OPEN BOX
Nuke Performance Competition Fuel Cell Unit – OPEN BOX
$614.00
$521.90
- Puts surge tank inside fuel cell eliminating many fuel lines
- Fits most popular fuel cells with standard 6″ x 10″ fill plate
- Use with single or dual internal fuel pumps from Deatschwerks or Walbro
- Single AN-8 or AN-10 high pressure output
- This is an OPEN BOX Item
Description
This is an Open Box item. Everything is included but box has been opened.
This is a 24 bolt fuel cell fill plate replacement that contains a built in Fuel Surge Tank for single or dual internal fuel pumps, such as DW300, DW400, Walbro GST450, Walbro GST 520 or any standard 39mm pump. It gives you a light weight and space efficient installation with minimum fuel piping and a easy-to-use setup. It really simplifies the setup and reduces the failure points in fuel system plumbing.
The Nuke Performance Competition Fuel Cell Unit (CFC) is a fill plate replacement for fuel cells from market leading manufactures including ATL, FuelSafe, Jaz, Harmon, Pyrotect and several others. It has a 6*10″ design with the standardized 24 bolt pattern to fit most manufacturers fuel cells. The minimum mounting depth of the fuel cell is 8.62″ (219mm).
The output of the two internal pumps is combined into one 7/8 AN-8 / AN-10 outlet with both fittings included. This allows the fuel tank to deliver steady fuel flow even for engines over 1400 HP. For the lift pump (pickup pump), the well known electrical connectors makes it possible to choose from almost any pump. The CFC’s surge tank has the well-known Nuke billet brackets and with this kit you get both the bracket for 39mm fuel pumps as well as the bigger one for Deatschwerks DW400 pumps.
Delivered with everything you need for a 1+1 or a 1+2 fuel pump installation and with both AN-8 and AN-10 fitting for the fuel line. It also comes with a AN-6 fitting with roll-over valve for ventilation. The fuel filler is integrated into the unit and comes with a billet aluminum cap. Alternatively, an adapter can be purchased to connect to fuel filler necks. Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol. Fuel pumps are not included.
Details
| Manufacturer Part # | 150-05-201 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 11.01 lbs (5.0 kg) |
| Height | 10″ (25.4 cm) |
| Width | 6″ (15.2 cm) |
| Length | 6″ (15.2 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
/center”>
relatedproducts
relatedproducts
Nuke Performance Volvo S40/V40 Fuel Rail Bolt-On Kit
Nuke Performance Volvo S40/V40 Fuel Rail Bolt-On Kit
Nuke Performance Volvo S40/V40 Fuel Rail Bolt-On Kit
$35.00
Bolt-on kit for Nuke Performance fuel rails on Volvo S40/V40 4 cylinder engines
Description
For use with Nuke Performance fuel rails to mount as a bolt-on to Volvo S40/V40 4 cylinder engines
Specifications
| Model | Volvo | See more like this |
|---|
Details
| Manufacturer Part # | 99-01-101 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 1.10 lbs (0.5 kg) |
| Height | 2″ (5.1 cm) |
| Width | 3″ (7.6 cm) |
| Length | 4″ (10.2 cm) |
| CARB compliant | No (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
obp Motorsport 35oz (1 Litre) Bulkhead Mount Dark Matter Fuel Swirl Pot
obp Motorsport 35oz (1 Litre) Bulkhead Mount Dark Matter Fuel Swirl Pot
obp Motorsport 35oz (1 Litre) Bulkhead Mount Dark Matter Fuel Swirl Pot
$91.02
1 L capacity, bulklhead mount
Description
Aluminium Products have always been a core part of obp Motorsport’s product line up. Over recent years we have been inundated with requests from customers for something different than our bare aluminium finish. In response we have created our signature Dark Matter Black Finish.
Product Information:
Capacity: 35oz (1 Litre)
Dimensions: (H) 5.3″, (Dia) 3.9″
Inlet: 2x .39″ (10mm) Push On
Outlet: ½” Push On
Breather: .39″ (10mm) Push On
Extras: Bulkhead Mount
Specifications
| Volume | 1 liter | See more like this |
|---|---|---|
| Ports | 4 | See more like this |
| Inlet Port Size | 10 mm push-on | See more like this |
| Outlet Port Size | 1/2 in push-on | See more like this |
| Pump Compatibility | Any | See more like this |
| Pump Location | External | See more like this |
Details
| Manufacturer Part # | OBPA025DM |
|---|---|
| Weight | 0.88 lbs (0.4 kg) |
| Height | 5.12″ (13.0 cm) |
| Width | 3.94″ (10.0 cm) |
| Length | 3.94″ (10.0 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
obp Motorsport Pro-Drift V2 Hydraulic Handbrake (Non-Lockable) 12.5″-15″
obp Motorsport Pro-Drift V2 Hydraulic Handbrake (Non-Lockable) 12.5″-15″
obp Motorsport Pro-Drift V2 Hydraulic Handbrake (Non-Lockable) 12.5″-15″
$231.74
Aluminum & mild steel construction, non-lockable
Description
The Pro-Drift V2 – The Original Hydraulic Handbrake. Designed for the professional and semi-professional teams and drivers, which can be universally mounted for any Motorsport application. The mix of Mild Steel Cradle and Aircraft Grade T6061 Aluminium, allows for excellent rigidity, enhanced feel and bullet proof construction.
- Aircraft Grade T6061 Aluminium Handle
- Mild Steel Cradle Construction
- Ergonomic Fit
- Horizontal or Vertical All-in-One Design
Fitment: Vertical Pull Back or Horizontal Pull Up Locking: No Length: 12.5″-15″ Adjustable Grip
Details
| Manufacturer Part # | OBPHBV20A1 |
|---|---|
| Weight | 4.85 lbs (2.2 kg) |
| Height | 16.93″ (43.0 cm) |
| Width | 1.97″ (5.0 cm) |
| Length | 6.3″ (16.0 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
obp Motorsport Track-Pro V2 Floor Mounted 3 Pedal System
obp Motorsport Track-Pro V2 Floor Mounted 3 Pedal System
obp Motorsport Track-Pro V2 Floor Mounted 3 Pedal System
$674.99
Floor mounted pedal set, angled cradle
Description
The V2 Track Pro Pedal System combines the engineering from the Pro-Race V2 Pedal System along with the Cradle Design from the Track Pro System. With an angled cradle allows it to fit to the floor pan with ease.
- Aircraft Grade T6061 Aluminium Pedals
- Mild Steel Cradle Construction
- 5.05:1 to 5.45:1 Pedal Ratio
- Multiple Pedal Pad Adjustment
- Adjustable Pedal Ratios
- Adjustable Accelerator Return
- Drive-By-Wire Compatible
- Dark Matter Coating
Fitment: Floor
Pedal Ratio: 5.05:1 – 5.45:1
Details
| Manufacturer Part # | OBP0331 |
|---|---|
| Weight | 17.49 lbs (7.9 kg) |
| Height | 12.99″ (33.0 cm) |
| Width | 9.45″ (24.0 cm) |
| Length | 9.84″ (25.0 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
