AeroCatch hood pins are used across a variety of motorsport applications to secure hoods/bonnets, trunks/boots and tailgates. AeroCatch are tested in an UK independent testing house to ensure the maximum safety levels are achieved. The high strength plastic material they are made from can be painted allowing full customization and optional discretion, making them suitable for street, race and rally. The 125 Series offers modern aerodynamic styling combined with light weight, high strength construction, making it a popular choice across a variety of motorsport applications. The 125-2100 version has a black finish with an aluminum pin and is mounted from underneath the panel it secures. It is also lockable with keys to prevent opening of the panel. The kit contains:

• 2x AeroCatch black
• 2x Nut fixing plates
• 2x Red Aluminium pin
• 2x Rubber bump stops
• 2x Key sets
• 1x AeroCatch fastener kit
• 1x AeroCatch arrow sticker set

AEM’s 400lph Metric High Flow, high pressure Inline Fuel Pump (PN 50-1009) is the perfect direct replacement upgrade for 044 pump users who want more fuel flow for their high performance vehicle! The 400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. It utilizes the industry standard “044 Style” envelope. It is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400lph (105 gph) at 40 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available on the Specs tab. The AEM 400lph Metric High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels. Features:

• Designed for high output naturally aspirated and forced induction EFI vehicles
• Popular “044 Style” physical configuration with metric fittings for direct replacement of 044 pumps!
• Maintains very high flow even at boosted fuel pressures; 340 lph at 73 PSI (30 psi boost)
• Each pump individually tested to flow minimum of 400lph (105gph) at 40 PSI
• Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)
• Kit includes fuel pump, check valve fitting, terminal nuts & boots, instructions

*Power rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump, 6.2 lbs/gal with a BSFC of 0.65. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.

AEM’s wideband O2 UEGO AFR replacement sensor and stainless-steel, finned, stand-off bung kit includes only a replacement Bosch 4.2 LSU Wideband UEGO sensor and stainless steel tall manifold bung. It is designed for installation and use with the AEM 4-Channel Wideband UEGO Controller, and forced induction (turbo and supercharged) applications. These sensors have a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output. The wideband sensor is laboratory-calibrated https://www.youtube.com/watch?v=lxATvzQApF4at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller. Features:

• Accurate to 0.1 AFR
• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Specifically designed for use with AEM Wideband UEGO controllers
• Includes sensor and weld-on stainless-steel tall manifold bung

PN 30-2065 is a K-Type replacement sensor only. If you need to rewire an existing K-Type thermocouple sensor, PN 30-2066 is a wiring extension harness that includes 10′ of wiring, hex nuts, screws and inconel sheath. NOTE: For the most accurate readings using a K-Type thermocouple sensor, see our 8-Channel K-Type EGT CAN Module, PN 30-2224.

Includes: K-Type Closed Thermocouple Sensor 10′ Wiring Extension, 2 X 4-40 Hex Nut, 2 X 4-40 Screw & 6″ Heat Shrink Tubing

AEM’s Infinity Series ECU stand alone management systems deliver a high end Motorsports output at a price that makes it attainable for a sportsman racer. The Infinity ECU delivers state-of-the-art programmable EFI control capabilities with airflow-based tuning models. System installation is more simplified and the tuning process is speed up by eliminating many of the setup requirements necessary in previous generation ECUs. The Infinity ECU is built around a 200MHz, 32-bit automotive processor and a Real Time Operating System, which is capable of processing 400 million instructions per second. This allows the Infinity to do more, faster, in a more stable programming environment.

ECU Series 7 Features:

• Infinity 710 features 10 high/low imp injectors, 10 coils, 4 VVTi and 2 DBW
• Infinity 712 features 12 high/low imp injectors, 8 coils, 4 VVTi and 2 DBW

Specs:

• Airflow model based (VE) tuning
• ECU Set Up Wizard simplifies start up
• Flex Fuel compatible
• Multi fuel capable
• Drive by wire
• Variable valve control
• Multiple boost control strategies
• Nitrous control
• Map switching
• Dual knock sensing circuits
• Data logging up to 64 GB
• Outputs to 3rd party dashes and loggers
• Industry leading transfer speed
• Integrated engine protection strategies
• Sealed enclosure and IP67-rated comms ports

Selecting The Right ECU:

Infinity ECU modules are designed for maximum flexibility across many types of applications. ECU modules and harnesses are sold separately for both Supported and Plug and Play applications. Choose the ideal Infinity ECU based on your application’s ignition and fuel injector output requirements using the Infinity Comparison Chart, and then choose between the available Plug and Play or Universal harnesses to create the Infinity solution that suits your specific needs.

AEM’s X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU, and deliver the most accurate, safe and powerful tune. The 30-0334 X-Series OBDII Wideband Gauge is validated to work with EFILive, HPTuners and DashDaq software. The X-Series Wideband AFR OBDII Gauge includes an OBDII pass-through connector and Bosch 4.9LSU sensor that can be free-air calibrated or used with the factory resistor calibration. Additional wiring for a 0-5v or RS232 Serial output can be added by the user for outputting to a data logger. This OBDII pass-through capability replaces the traditional AEMnet stream available in the 30-0300 X-Series Wideband AFR Gauge Controller.

OBDII CAN-bus OUTPUT

The OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate.

PATENTED X-DIGITAL TECHNOLOGY – It’s The Fastest

X-Series Widebands are the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers.* The controller’s high speed, patented, X-Digital technology (Patent 9,575,030) ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.

WHY RESPONSE TIME MATTERS

Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology reduce deadtime and can improve the performance of your vehicle through more accurate AFR tuning.

FACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE!

X-Series Wideband Gauges and the X-Series Inline Controller support the popular Bosch 4.9LSU sensor, and can utilize both the factory calibration resistor and free-air calibration methods. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages.** It’s the perfect marriage of simplicity and accuracy!

WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?

AEM’s Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

WHY USE A WIDEBAND AIR/FUEL CONTROLLER?

Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?

No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output. * Independently tested at 360° Product Testing (results reported on August 31st, 2015) against 17 competitor wideband UEGO Air/Fuel Controllers. AEM X-Series Inline with Bosch 4.9LSU wideband sensor and AEM X-Series Wideband UEGO AFR Gauge with Bosch 4.9LSU sensor recorded the fastest response times. ** Wideband UEGO sensors are wear items and their lifespan is determined by many factors including contamination from leaded fuels, automotive fluids, particulates, mechanical or thermal shock and from being unheated and exposed to the exhaust stream. Free-air calibration may correct drift as a sensor ages, but it is recommended that they are replaced as part of your vehicle’s maintenance program. When performing free-air calibration, please follow the procedure outlined in the instruction manual.

Features:

• Patented X-Digital Technology makes it the Fastest Responding Wideband AFR Controller (Patent # 9,575,030)
• OBDII pass-through provides AFR readings through the factory ECU CAN-bus – Ideal for users with piggyback programmers or open source tuning software
• Includes Bosch 4.9LSU wideband UEGO sensor and OBDII pass-through connector
• Use the factory 02 calibration or free-air calibrate using buttons on faceplate
• Compatible with vehicle/system voltages up to 16V
• Optional outputs for 0-5V & RS232 for data logging and feedback control (requires wiring)
• Can display AFR values in hundredths of %
• 52mm gauge diameter and slim 0.825” gauge depth
• Gauge cup depth only .200” deep!
• Auto dimming feature
• User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, 3- or 4-digit display and OBDII output settings (if necessary)
• Black bezel and black dual faced faceplate included (silver bezel/white gauge option sold separately, PN 30-0300-ACC)
• Locking connectors

The AeroCatch Xtreme series is the latest evolution of the famous hood pins designed for the much harsher conditions of the off-road and rally racing. With its steel strike pins, AeroCatch Xtreme has been designed to withstand the conditions found in even the most severe raid events. Having listened to and from working with customers involved in off-road racing, AeroCatch engineers gained essential feedback that created this ruggedized version suitable for their tougher requirements. AeroCatch hood pins are used across a variety of motorsport applications to secure hoods/bonnets, trunks/boots and tailgates. AeroCatch are tested in an UK independent testing house to ensure the maximum safety levels are achieved. The high strength plastic material they are made from can be painted allowing full customization and optional discretion, making them suitable for street, race and rally. The 125 Series offers modern aerodynamic styling combined with light weight, high strength construction, making it a popular choice across a variety of motorsport applications. The 125-4000 version has a black finish with a steel pin and is mounted from above with a backing plate. The kit contains:

• 2x AeroCatch black
• 2x Nut fixing plates
• 2x Steel pin
• 2x Rubber bump stops
• 1x AeroCatch fastener kit
• 1x AeroCatch arrow sticker set