The AeroCatch Xtreme series is the latest evolution of the famous hood pins designed for the much harsher conditions of the off-road and rally racing. With its steel strike pins, AeroCatch Xtreme has been designed to withstand the conditions found in even the most severe raid events. Having listened to and from working with customers involved in off-road racing, AeroCatch engineers gained essential feedback that created this ruggedized version suitable for their tougher requirements. AeroCatch hood pins are used across a variety of motorsport applications to secure hoods/bonnets, trunks/boots and tailgates. AeroCatch are tested in an UK independent testing house to ensure the maximum safety levels are achieved. The high strength plastic material they are made from can be painted allowing full customization and optional discretion, making them suitable for street, race and rally. The 125 Series offers modern aerodynamic styling combined with light weight, high strength construction, making it a popular choice across a variety of motorsport applications. The 125-4000 version has a black finish with a steel pin and is mounted from above with a backing plate. The kit contains:

• 2x AeroCatch black
• 2x Nut fixing plates
• 2x Steel pin
• 2x Rubber bump stops
• 1x AeroCatch fastener kit
• 1x AeroCatch arrow sticker set

Brass sensors are a more economical choice usable in many applications where extreme accuracy isn’t required and +/- 3% accuracy vs. stainless steel’s +/- 1% is appropriate. AEM’s brass sensor kits contain the sensor, connector and pins.

Specifications:

• Accuracy: +/- 3% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
• Operating Temp: -40C to 105C / -40F to 221F
• Burst Pressure: 100PSI
• Response Time:
• Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
• Sensor Body: Stainless Steel
• Wetted Materials: 304L & 316L Stainless Steel
• Thread: 1/8″ NPT Male Thread
• Weight:
• Supply Current:
• Output: .5 to 4.5Vdc Linear
• Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
• Includes: 50 PSIa or 3.5Bar Stainless Sensor, Connector, Pins & Pin Lock

AEM’s Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers. These sensors have a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output. The wideband sensor is laboratory-calibrated at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller. Features:

• Accurate to 0.1 AFR
• Never requires free-air calibration when used with an AEM Controller and connector plug.
• Specifically designed for use with AEM Wideband UEGO controllers
• Replacement sensor only
• Replacement Sensor for the following AEM Wideband Controllers.

AEM Infinity Engine Management Systems:

• 30-4100 – Digital Wideband UEGO Gauge
• 30-4900 – Wideband Failsafe Gauge
• 30-2310 – Inline Wideband UEGO Controller
• 30-2340 – 4-Channel Wideband UEGO Controller
• 30-2340-N – 4-Channel Wideband UEGO Controller – Nascar
• 30-5130 – Analog Wideband UEGO Gauge
• 30-5143 – Analog E85 Wideband UEGO Gauge
• 30-2320 – X-WiFi Wideband/EGT Controller

For Digital Wideband UEGO Controller Part Number 30-4110 please refer to the 30-2004 Bosch LSU 4.9 Replacement UEGO Sensor PN 30-2004.

PN 30-2068 is a K-Type, closed tip thermocouple sensor. It includes a closed tip TC sensor with an inconel sheath, 10′ extension wire, 1/8″ NPT compression fitting, and ring and terminal harness. This is for the individual sensor.

Features

AEM’s Infinity Series ECU stand alone management systems deliver a high end Motorsports output at a price that makes it attainable for a sportsman racer. The Infinity ECU delivers state-of-the-art programmable EFI control capabilities with airflow-based tuning models. System installation is more simplified and the tuning process is speed up by eliminating many of the setup requirements necessary in previous generation ECUs. The Infinity ECU is built around a 200MHz, 32-bit automotive processor and a Real Time Operating System, which is capable of processing 400 million instructions per second. This allows the Infinity to do more, faster, in a more stable programming environment.

ECU Series 7 Features:

• Infinity 710 features 10 high/low imp injectors, 10 coils, 4 VVTi and 2 DBW
• Infinity 712 features 12 high/low imp injectors, 8 coils, 4 VVTi and 2 DBW

Specs:

• Airflow model based (VE) tuning
• ECU Set Up Wizard simplifies start up
• Flex Fuel compatible
• Multi fuel capable
• Drive by wire
• Variable valve control
• Multiple boost control strategies
• Nitrous control
• Map switching
• Dual knock sensing circuits
• Data logging up to 64 GB
• Outputs to 3rd party dashes and loggers
• Industry leading transfer speed
• Integrated engine protection strategies
• Sealed enclosure and IP67-rated comms ports

Selecting The Right ECU:

Infinity ECU modules are designed for maximum flexibility across many types of applications. ECU modules and harnesses are sold separately for both Supported and Plug and Play applications. Choose the ideal Infinity ECU based on your application’s ignition and fuel injector output requirements using the Infinity Comparison Chart, and then choose between the available Plug and Play or Universal harnesses to create the Infinity solution that suits your specific needs.

The aerodynamically efficient and styled AeroCatch® is setting new standards in panel fixing, providing a wide variety of fixing solutions for access hatches, cabinet doors and bodywork on vehicles. Shoot bolt action provides simple locking action. Key Features

• Below Panel
• Simple Installation
• Marine grade stainless steel hardware
• Lightweight, high strength
• Corrosion resistant and UV stable
• Handle visible if not closed correctly
• Non trip hazard in closed position

The 225-2000 version has a black finish with an aluminum pin and is mounted from below with a backing plate. The kit contains:

• 2x AeroCatch 2
• 2x Extension Shoe
• 1x AeroCatch fastener kit
• 1x AeroCatch arrow sticker set

Stainless steel sensors are recommended when the greatest accuracy is required, for example to measure manifold air pressure. AEM’s sensor kits contain everything you need to mount a sensor, including connector, pins and 1/8 NPT fittings.

Specifications:

• Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
• Operating Temp: -40C to 105C / -40F to 221F
• Burst Pressure: 750PSI
• Response Time: < 1ms
• Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
• Sensor Body: Stainless Steel
• Wetted Materials: 304L & 316L Stainless Steel
• Thread: 1/8″ NPT Male Thread
• Weight: < 85 Grams
• Supply Current:
• Output: .5 to 4.5Vdc Linear
• Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
• Includes: 100 PSIa or 7 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8″ NPT to -4 Adapter & 1/8″ NPT to 3/16″ Barb Adapter